Publicité
Preparing your Lenovo PHAB
A Micro SIM card provided by your carrier is required in order to use cellular services.
A microSD card is required to store data.
Install the Micro SIM cards and the microSD card as shown.
Step 1.
Insert the eject tool that comes with your device into the hole in the card tray.
Step 2.
Pull out the card tray and do one of the following:
Position the SIM1 card in Slot1 and the SIM2 card in Slot2, or position the
SIM1 card in Slot1 and the microSD card in Slot2.
Both of the card slots support 4G/3G/2G data services, but you can enable
only one Micro SIM card for data connection at a time. If you want to change
the Micro SIM card used for data connection, go to Settings > SIM Cards >
Celluar Data.
Step 3.
Carefully insert the tray with the installed cards back into the slot.
3
Publicité
