Publicité
Les langues disponibles
Les langues disponibles
B
•
Remove the upper left hinge cover and upper left hinge from the accessory bag. Place
the refrigerated door body on the middle hinge and install the upper left hinge. Connect
the refrigerator top signal line 4 to the door body signal line 1, and connect the signal
line 2 to the signal line 3. Finally, replace the hinge cover to the right side of the box body,
the two inserts of the hinge decorative cover (as shown in the figure) shall be cut off).
Changing the Light
•
This product contains a light source of energy efficiency class G.
•
Light source in this product can only be replaced by qualified professionals.
•
Please contact after-sales service if the light source fails.
•
The light source shall be removed at the end of the product's useful life, with sorting and
recycling done separately.
Using the appliance
upper hinge
11
upper hinge cover
decorative cover
EN
inserts
Publicité
