La Sommeliere CTPNE120E Notice D'utilisation page 34

Install the handle onto the door of wine cellar
The CTPNE120/CTPNE120E wine cellars are supplied with a handle.
Install the handle only with a manual screwdriver. Do not use power tools that could
damage the door.
As the cellar door is reversible, the placement of the handle therefore depends on the
desired configuration.
Holes are visible on each side of the door frame to allow placement of the handle on the
right or left side.
When purchasing your cabinet, the handle is delivered in a separated package and a
bag of hardware is also provided.
The hardware bag contains 2 metal screws to fix the handle and 2 screw covers and 2
hole covers for unused screws and holes.
• Place the handle on the desired location, screw it to the door with the 2 metal
screws provided.
• Use the 2 screw covers to hide the handle screws.
• Put the additional 2 hole covers on the opposite holes placed on the other side of
the frame door.
Ambient room temperature limits
When selecting a location for your appliance you should make sure the floor is flat and firm, and
the room is well ventilated. This device is suitable for operation in rooms with a very specific
ambient temperature, this climatic class is indicated on the nameplate. The ambient
temperature affects the interior temperature and humidity of your cellar. For optimal operation,
your cellar settings are made for ambient temperatures of 23 ° C to 25 ° C.
CLASS
Extended temperate
Temperate
Subtropical
Tropical
SYMBOL AMBIENT TEMPERATURES RANGE (°C)
SN
N
ST
T
33
From +10 to +32
From +16 to +32
From +16 to +38
From +16 to +43