Télécharger Imprimer la page

La Sommeliere CTPNE120E Notice D'utilisation page 33

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
6. 6. Place the bottom hinge on the opposite side after removing the left front
leg, and secure the hinge by tightening the screws.
7. 7. Screw the big foot back on, now on the left side. Also screw the foot on
the right side.
8. Return your wine cellar to an upright position.
9. 9. Place the door on the bottom hinge. Make sure the glass door is upright
and closes easily.
10. Place top hinge on opposite side and door, then replace hinge screws
loosely.
. 11. Once the door is installed, adjust the clearances to keep the door
vertical and then finally tighten the top hinge screws.
12. Refit the upper hinge cover.
Note: The door seal may come out of place when changing sides. If you notice any
openings between the seal and the compartment frame when the door is closed,
carefully pull the seal to close these openings. The correct positioning of the seal is
important to guarantee the tightness of your wine cellar.
Foot adjustments
Your wine cellar is equipped with an adjustable foot to make it easier to level.
It is recommended to adjust and adjust the front feet to level the wine cellar. Proper adjustment
of the level and the feet will limit vibrations and the resulting noise.
1. Turn the adjustable foot by hand (be careful not to hurt your hands).
2. Counter-clockwise: to raise the level of the wine cellar
3. Clockwise: to lower the level of the wine cellar
32

Publicité

loading

Ce manuel est également adapté pour:

Ctpne120Ctvne120