Uline H-6553 Mode D'emploi page 4

TOWEL
1. Adjust panels to desired width. (See "Adjusting Table
Fold Width" on page 5.)
2. Lay towel horizontally across panels. Adjust edges
by hand to appropriate measured overhang.
(See Figure 10)
FOLD WIDTH RIGHT OVERHANG
9"
10"
11"
12"
13"
NOTE: Overhang may need to be adjusted
slightly due to imperfections in the towel.
NOTE: 7" and 8" folds require no overhang.
Right and left edges of towel should be inset 2"
and 1", respectively, from outer edge of panels.
3. Flip panel with folded towel edge (if applicable) first
and return panel to original flat position.
(See Figure 11)
4. Flip opposite panel and return panel to original flat
position. (See Figure 12)
5. By hand, fold towel in half or in thirds to complete fold.
(See Figure 13)
PAGE 4 OF 15
OPERATION CONTINUED
LEFT OVERHANG
1/4" 0" (Even with edge)
1⁄" 1"
2⁄" 2"
3⁄" 3"
4⁄" 4"
Figure 10
Figure 11
Figure 12
Figure 13
0524 IH-6553