Maytag MDB-6 Guide D'utilisation Et D'entretien page 9

Cycles, Options andLights
Cycle Options
In addition to choosing a cycle from page 7, choose as many available options as are needed for your dishload.
Hi Temp Wash Hi Temp Wash provides additional heat during the wash portion All cycles
(select models) of the cycle, which ensures proper water temperature for better (except Rinse Only
cleaning and drying results. It also adds an additional rinse to [select models])
the cycle which improves results in hard water situations.
TonghScrubZ"/
Selected when washing loads with hard-to-remove food soils. Heavy Wash
ToughScrub z"
PlUS Depending on which cycle is being used, this option adds Normal Wash
(select models) heat and/or wash time to the wash cycle. Light Wash
Auto Clean
Sanitize
(select models)
Heavy Wash*
Normal Wash*
Light Wash*
Auto Clean*
Sanitizes dishware. When cycle monitor recognizes that the
proper conditions have been met, SANITIZED light will activate
at the end of the cycle. Sanitization may not be achieved if
there is an interruption of the cycle, power failure or if the
incoming water temperature is below 120 ° F (49 ° C).
Adds an additional rinse to cycle. An extra rinse helps to
improve results in hard water situations.
Raises temperature in the final rinse to 160 ° E This option can
be used with any cycle except Quick Wash or Insta Wash
(select models) and Rinse Only.
Extra Rinse All cycles
(select models) (except Rinse Only)
160 ° Wash Heavy Wash
(select models) Normal Wash
Auto Clean
Heated Dry
For enhanced drying results select this option. When Heated
Dry is not selected, towel drying of some items such as plastic
and items with non-stick surfaces may be necessary and more
moisture may be noticed adhering to the dishwasher interior.
In models with plastic interiors, it is normal to notice vapor
escaping from the door vent as the heat dries your dishes.
Vapor will escape even if Heated Dry is not selected.
All cycles
(except Rinse Only)
* Only these cycles have been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization.
Options
Start/Cancel Starts and stops dishwasher. See page 2 under Operating Tips: All Cycles
Operating the Dishwasher, for explanation.
Used to automatically start the cycle at a later time. See page 9 All Cycles
Delay for instructions.
Control Lock Option Locks control touchpad to prevent unwanted use. See page 9 All Cycles
(select models) for instructions.
Cont.