Hilti Nuron SC 6WL-22 Notice D'utilisation Originale page 16

3.6 Parallel guide
Use of the single-arm parallel guide allows precise cuts to be made along the edge of the workpiece, or
strips of even width to be cut.
The parallel guide can be fitted on either side of the base plate.
3.7 Scaffold hook
The product has a scaffold hook that you can use to hook the product briefly to a railing, for example. To
use the scaffold hook, flip the scaffold hook 180° straight up.
When flipped out, the scaffold hook can be pivoted approx. 30° forward to the transport position.
Before flipping the scaffold hook back in, pivot the scaffold hook back approx. 30° to the initial position.
4 Technical data
4.1 Product properties
Rated voltage
Weight
Saw blade diameter
Saw blade disc thickness
Kerf width
Saw blade arbor size
Rated speed under no load
Maximum cutting depth
Bevel cutting angle
Storage temperature
Ambient temperature for operation
4.2 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
10 English
SC 6WL-22
21.6 V
2.60 kg
(5.73 lb)
160 mm ... 165 mm
(6.3 in ... 6.5 in)
0.5 mm ... 1.5 mm
(0.02 in ... 0.06 in)
1.5 mm ... 2 mm
(0.06 in ... 0.1 in)
15.9 mm
(5/8 in)
5,000 /min
(83.3 Hz)
60 mm
(2.4 in)
0° ... 53°
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
21.6 V
See the end of these operating
instructions
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
2359562
*2359562*