JVC LT-32FD300 Notice D'utilisation page 95

USING THE MENUS
• DTV Manual Tuning
Press the ◄ / ► button to select a channel, then
press the ENTER button to search program.
If you stop the tuning before it has finished, the TV
will report a no signal error. This is normal because
all previous channel memory has been cleared before
tuning.
• Program Edit
1. Press▼ / ▲ to highlight the channel you want to
select.
2. Press the RED button to delete the program in the
list.
3. Press the YELLOW button to move the channel in
Program Edit.
4. Press the BLUE button to skip the selected channel.
(Your TV set will skip the channel automatically
when using CH+/- to view the channels.)
5. Press the Fav button to add or remove the channel
to your favorite list.
10
• Schedule List
Press the YELLOW button to enter the interface
below.
• Signal Information
Press the ENTER button to see the detail
information about the signal.
Only available when there is signal in DTV mode.