Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
Before contacting an
Authorised Service Centre,
write down the PNC number.
Refer to "Basic settings".
12.1 The dishwashing and drying results are not satisfactory
Problem
Poor washing results.
Poor drying results.
There are whitish streaks or
bluish layers on glasses and
dishes.
There are stains and dry water
drops on glasses and dishes.
The interior of the appliance is
wet.
Unusual foam during washing. •
Possible cause and solution
•
Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
•
Use more intensive washing programme.
•
Activate the ExtraPower option to improve the washing
results of a selected programme.
•
Clean spray arm jets and filter. Refer to "Care and
Cleaning".
•
Tableware was left for too long inside the closed appli‐
ance. Activate the function AirDry to set the automatic
opening of the door and to improve the drying perform‐
ance.
•
There is no rinse aid or the dosage of rinse aid is not
sufficient. Fill the rinse aid dispenser or set the dosage
of rinse aid to a higher level.
•
The quality of the rinse aid can be the cause.
•
Always use rinse aid, even with multi-tablets.
•
Plastic items may need to be towel dried.
•
The programme does not have the drying phase. Re‐
fer to "Programmes overview".
•
The released quantity of rinse aid is too high. Adjust
the rinse aid dosage to a lower level.
•
The quantity of detergent is too high.
•
The released quantity of rinse aid is not sufficient. Ad‐
just the rinse aid dosage to a higher level.
•
The quality of the rinse aid can be the cause.
•
This is not a defect of the appliance. Humidity conden‐
sates on the appliance walls.
Use the detergent designed specifically for dishwash‐
ers.
•
Use a detergent from a different manufacturer.
•
Do not pre-rinse dishes under running water.
WARNING!
We do not recommend using
the appliance until the
problem has been
completely fixed. Unplug the
appliance and do not plug it
in again until you are certain
that it operates correctly.
ENGLISH
29