Dovre 325CB Installation Et Mode D'emploi page 29

1. Open the door; see the following figure.
2. Remove the fire-resistant inner plates; see the
following figure.
a. First remove the fire basket (3).
b. Take one of the inner plates (4) out of the
appliance.
c. Then remove the baffle plate (5)
d. Remove the second inner plate (4)
Vermiculite inner plates are light and tend
to be ochrous in colour on delivery. They
insulate the combustion chamber to boost
combustion.
Subject to change because of technical improvements
3. Close the door.
Removable internal sections
3 fire basket
4 inner plate on the left and right side
5 baffle plate
Connecting to the rear
1. Apply supplied fibre glass sealing tape (2)
measuring 10 x 3 mm to the connection collar's
contact surface (8).
2. Remove the protection plate from the back shield
with the assistance of a screwdriver; see following
figure.
09.20020.100
7