Publicité
Les langues disponibles
Les langues disponibles
COOLING
To avoid possible compressor
damage, do not operate the cooling
system when outside temperature
is below 10° C [50° F]. See com-
pressor manu-facturer's instructions
for further information.
NOTE: When cooling setting is
changed, thermostat may delay
up to five minutes before turning
on the air conditioner. This delay
protects the compressor.
Move the system switch to COOL
Cool
Off
Heat
and the fan switch to AUTO.
Auto
On
Press key until setting is about
6° C [10° F] below room tempera-
Cooler
ture. The cooling equipment and fan
should start.
Press key until the setting is about
Warmer
6° C [10° F] above room tempera-
ture. The cooling equipment and fan
should stop.
Cool
Off
Heat
Move the system switch to OFF,
with the fan switch still at AUTO.
Auto
On
The system and fan should be off.
26
Publicité
