Publicité
Les langues disponibles
Les langues disponibles
Remove mounting plate from wall, and drill
3/16" holes in wall (if drywall) as marked. For
firmer material such as plaster or wood, drill
7/32" holes. Gently tap anchors (provided) into
drilled holes until flush with the wall.
Reposition mounting plate over holes, pulling
wires through wiring opening. Loosely insert two
mounting screws into holes.
Level for appearance only; thermostat will
function properly even when not level. Tighten
mounting screws.
19
SPIRIT LEVEL
M1714
INSTALLATION
Publicité
