Publicité
Les langues disponibles
Les langues disponibles
STEP 4
Program The Thermostat
After the batteries are installed, the thermostat
can be easily programmed in your hand, before
it is installed on the wall.
If you would prefer to program the thermostat
after it is installed on the wall, skip to page 16,
and return later to this programming section.
The following personal programming chart
(pages 10-11) may be helpful for planning your
program schedule of time and temperature
settings for various times of the day.
Four time periods are available during
weekdays — "WAKE", "LEAVE", "RETURN",
and "SLEEP". These periods can be seen
individually on the display as you press the
SET SCHEDULE key.
"WAKE" is the time period you want the
house at a comfortable temperature after you
get up, while you get ready for work or
school. (This will be a higher temperature
during heating season, or a lower tempera-
ture during cooling season.)
"LEAVE" is the time period you can set for an
energy-saving temperature while you are
away at work or school. (This will be a lower
temperature during heating season, or a
higher temperature during cooling season.)
"RETURN" is the time period you want the
house at a comfortable temperature for
activities before bedtime. (Again, higher heat
or lower cool.)
"SLEEP" is the time period you can set for an
energy-saving temperature while you are
8
Publicité
