Sauder Hutch 428724 Instructions De Montage page 10

Step 6
å
Fasten the right END (A) to the TOP (K2). Tighten two
TWIST-LOCK® FASTENERS.
å
Fasten the VALANCE (D) to the TOP (K2). Tighten two
TWIST-LOCK® FASTENERS.
i t h
e w
f a c
S u r
Page 10
A
M S
C A
D E N
H I D
For support, place packing
foam and magazines here.
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
428724
2
FASTENER
®
Dowel end
K2
D
www.sauder.com/service