Publicité
Les langues disponibles
Les langues disponibles
Instruction manual BES M12EF2-PSC20B-BV02-X01
Trouble shooting
Failure
The functioning indicator does not light
when the proximity switch is actuated
No change of switching signal
Maintenance, repairs and trouble-shooting
• Do not modify or repair the device – its approval will expire. Contact the manufacturer
for any problems.
• Prevent dust from covering the device, i.e by regulary cleaning with a damp cloth.
Scope of delivery, transportation and disposal
• Inspect packaging and content for damage.
• Check the delivery for completeness.
• Disposal note: Do not dispose the device in the domestic waste, comply with relevant laws and
national regulations.
List of applicable standards
CAN/CSA-C22.2 No. 60947-5-2-14
CAN/CSA-C22.2 No. 60079-0:19
CAN/CSA-C22.2 No. 60079-7:16
CAN/CSA-C22.2 No. 60079-31:15
CSA C22.2 No. 213-17
ANSI/UL 121201-2017 Ninth Edition
UL 60947-5-2 Third Edition
ANSI/UL 60079-0:19
ANSI/UL 60079-7:17
ANSI/UL 60079-31:15
Balluff GmbH
Schurwaldstr. 9
73765 Neuhausen a.d.F.
Germany
Tel. +49 7158 173-0
Fax. +49 7158 5010
BA-S36081-GB-2021-10
Cause of failure
Supply voltage too low or
not connected
Operation of the proximity
switch outside of specification
Page 4
Remedy
Check power supply
Check range of application
of the proximity switch
www.balluff.com
balluff@balluff.de
Dok.-Nr. 947396-EN/FR-C21
Subject to modification
Publicité
