Publicité
Les langues disponibles
Les langues disponibles
Wireless-G ADSL Gateway with SpeedBooster
Using the Gateway's SecureEasySetup Feature
Read these instructions before you press any SecureEasySetup buttons. You should locate the SecureEasySetup
buttons of your devices before using the Gateway's SecureEasySetup feature.
NOTE: SecureEasySetup ONLY uses WPA-Personal security. If your current wireless devices do
not support WPA-Personal security OR you want to use WPA2 security, then you cannot use
SecureEasySetup on your network. You will need to manually configure the security settings for
your wireless network.
1. Before you push any button, locate the SecureEasySetup button for each of your other SecureEasySetup
devices. If you are not sure where to find this button, click Where is my other SecureEasySetup button?
You will see a screen showing the SecureEasySetup logo. Click the Next button to continue or the Close
button to return to the Configure Wireless Settings screen.
You will see a screen with instructions on how to locate the SecureEasySetup hardware button. If your device
does not have a hardware button, it most likely will have a software button. Click the Next button for
instructions to locate the software button, or click the Close button to return to the Configure Wireless
Settings screen.
You will see a screen with instructions on how to locate the SecureEasySetup software button. Click the
Close button to return to the Configure Wireless Settings screen.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SpeedBooster
Using the Setup Wizard
Figure 5-18: Setup Wizard's SecureEasySetup Screen
Figure 5-19: SecureEasySetup Logo
Figure 5-20: Additional Information - Hardware Button
Figure 5-21: Additional Information - Software Button
20
Publicité
