Télécharger Imprimer la page

Cisco Systems Linksys WAG54GS Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

Wireless-G ADSL Gateway with SpeedBooster
Chapter 5: Setting up the Wireless-G ADSL Gateway with
SpeedBooster
Overview
The Wireless-G ADSL Gateway with SpeedBooster Setup Wizard will guide you through the installation procedure.
It will go through the instructions for configuring the Gateway's network and wireless settings.
Using the Setup Wizard
1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and
the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that
appears, enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
2. The Setup Wizard will automatically detect the language setting of your PC. On the initial Welcome screen,
click the Next button if you want to proceed with the Setup Wizard using the current language. If you want to
use a different language, select the appropriate language, and then click the Next button.
3. On the following Welcome screen, click the Click Here to Start button. These are your other choices:
Norton Internet Security - Click the Norton Internet Security button to install the Norton Internet Security
software program.
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SpeedBooster
Overview
Figure 5-1: Setup Wizard's Welcome - Language
Selection Screen
Figure 5-2: Setup Wizard's Welcome - Start
Wizard Screen
11

Publicité

loading