Publicité
Les langues disponibles
Les langues disponibles
Serial No:
• Please quote the individual BED SERIAL
NUMBER, to order Spare Parts or request a
Service Call.
• It is highly recommended that only Human
Care authorised accessories/parts are used
on Human Care beds. The Warranty may be
invalidated, and injury or damage may occur,
if other parts are used.
Cleaning
• Human Care beds can be safely cleaned with
all common hospital cleaning agents.
• Wipe all surfaces with a soft hygienic cloth
moistened with hot water and a mild
cleaning solution (a detergent or disinfectant
recommended by your facility or hospital).
Extra care should be taken with areas that
harbor dirt or dust. Rinse with clean water
and dry with paper towels, before replacing
mattress.
EMC table
Guidance and manufacturer´s declaration
Electromagnetic Emissions
The Medical Bed is intended for use in the electromagnetic environment specified below.
The customer or the user of the Medical Bed should ensure that it is used in such an environment.
Emissions Test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonic Emissions
IEC 61000-3-2
Voltage Fluctuations /
Flicker Emissions
IEC 61000-3-3
• To clean potentially infectious material
Compliance
Group 1
Class B
Class A
Complies
such as body fluids. Clean the bed with a
disinfectant solution.
Human Care beds are not intended
for use with high pressure or jet
steam washing procedures!
Do not pour liquids on any bed part
close to end panels or any parts
containing electrical componentry,
electronics may be damaged!
Electromagnetic
Environment
Guidance
The Medical Bed uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
The Medical Bed is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public
low-voltage power supply network that supplies
buildings used for domestic purposes.
www.humancaregroup.com
25
Publicité
