Aerus Beyond Laundry Pro 2.0 Manuel D'instructions page 7

REINSTALL THE COVER
1. Return the Laundry Pro 2.0 cover to its original position, tting the bottom in
place and tipping upward.
2. Secure with two (2) screws (not shown) along the top edge.
3. Put the two (2) remaining screws along the bottom edge and tighten.
NOTE:
Remove the two black caps from the hose connections
before installing hoses.
HOSE INSTALLATION
CAUTION:
When connecting hoses to your Laundry Pro 2.0 start by hand tightening the hose
connector(s). Using adjustable pliers, nish tightening hose connector(s). Do not
remove or disconnect the hot water line from your washing machine or water valve.
NOTE:
To ease hose installation and prevent cross threading, connect hose
prior to mounting unit on wall.
1. Turn the cold water o by shutting o the cold water faucet.
2. Remove the cold water hose from the cold water inlet on the back of
your washing machine. Leave hot water hose attached.
NOTE:
To help prevent water spray when disconnecting hoses, you can relieve
pressure in the water line by momentarily starting your washing machine.
Screws
Screws
7