Aerus Beyond Laundry Pro 2.0 Manuel D'instructions page 5

BEFORE YOU START
NOTE:
Your Laundry Pro 2.0 unit was factory tested. It is normal for some residual water to still remain in the unit as a result of these tests.
• Remove your new Laundry Pro 2.0 from its packaging
• Inspect the unit for any signs of shipping damage
REMOVING COVER
1. Remove the two (2) cover screws located on
the bottom of the unit.
2. Remove the two (2) screws (not shown) along
the top of the Laundry Pro 2.0.
3. To remove the cover, pull the top away from the
unit, then lift o the cover.
Screws
5