Publicité
Les langues disponibles
Les langues disponibles
Deco-Front Panel
On your dishwasher it is possible to install front panels of your choice.
Take the necessary panel dimensions from Fig.19.
To install the panels remove screws as shown, put the panels
in position and reassemble.
Important:
,,
For front panels between 2/16" - 4/16
(4-6 mm) thickness please use the interior
srewholes (a) undernearth the decorative frame.
_
...
For thinner panels the exterior srewholes
"_
should be used (b).
Fig. 20
When custom panels are used
the counterbalance
springs
may have to be adjusted.
If the door is falling open when
unlatched or pulls itself closed
from the fully open position
the door springs should be adjusted.
Adjust doorsprings as shown.
i+
±0 Ibs
19
Publicité
