EcoFlow RIVER 2 Pro Guide De Démarrage Rapide page 7

IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using this product, basic precautions should always be
followed, including the following:
1. Read all the instructions before using the product.
2. Do not use the product near a heat source, such as a fire source or a heating
furnace. Exposure to fire or temperature above 130°C (265°F) may cause
explosion.
3. Avoid contact with any liquid. Do not immerse the product in water or get it
wet. Do not use the product in rain or humid environments.
4. Do not use the product in an environment with strong static electricity/
magnetic fields.
5. Do not disassemble the product in any way for repair or modification, and do
not pierce the product with sharp objects. Take it to a qualified service person
when service or repair is required, Incorrect reassembly may result in a risk of
fire or electric shock.
6. Avoid using wires or other metal objects to inset any connector that may
result in a short circuit.
7. Do not use unofficial components or accessories that may result in a risk
of fire, electric shock, or injury to persons. If you need to replace any
components or accessories, please visit official EcoFlow channels to check
relevant information.
8. When using the product, please strictly follow the operating environment
temperature specified in this user manual. If the temperature is too high,
it may result in a fire or explosion; if the temperature is too low, the product
performance may be severely reduced, or the product may cease to work.
9. Do not stack any heavy objects on the product.
10. Do not lock the fan forcibly during use, product shall work in a well ventilated
area and do not restrict ventilation in any way.
11. Please avoid impact, falls, or severe vibrations when using the product. In case
of a severe external impact, turn off the power supply immediately and stop
using the product. Ensure the product is well fastened during transportation
to avoid vibrations and impacts.