Publicité
Les langues disponibles
Les langues disponibles
Install or store unit where it will not be exposed to temperatures
below freezing _r
exposed to outside weather conditions.
Properly
ground washer to conform with all governing
codes and ordinances.
To reduce the risk of electric shock, do not install tile washer in humid spaces.
The base opening must not be obstructed
by carpeting when the washing machine is installed on a carpeted
floor.
In areas where there are areas which may be subject tn infestation
by cockroaches
or other verndn,
pay
particular
attention
to keeping the appliance
and its surroundings
in clean condition
at all times.
Damage caused by cockroaches
or other vermin will not be covered by the appliance
warranty.
•, Shipping
bolts
The appliance
is fitted
with shipping
bolts to prevent
internal
damage
during
transport.
Removing
shipping
bolts
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts.
3. Take out the 4 bolts by twisting the braces
slightly. Keep the 4 bolts and the wrench for
future use.
• If they are not removed, it may cause severe
• Whenever the appliance is transported,
the
vibration,
noise, and malfunction,
shipping bolts must be replaced.
2. Unscrew the 4 bolts with the wrench
supplied.
cap
4. Close the holes with the caps supplied.
Publicité
