Miele PFD 400 Mode D'emploi page 50

en - Commissioning
Installation and connection
Before commissioning, the dishwasher must
be securely installed, and the water inlet and
drain hoses and the mains cable correctly
connected. Follow the instructions in "In-
stallation", "Water connection" and "Elec-
trical connection" as well as the installation
plan.
Procedure
The commissioning process follows a set
procedure which cannot be interrupted.
Switching on
Press the  button.

Selecting a language
Commissioning starts with the selection of
the display language.
‫ﺔﻴﺑﺮﻌﻟﺍ‬

Language
dansk
Scroll to the language you want using the

 and  arrow buttons and select the lan-
guage by tapping on it.
WiFi setup
In the next step, you can connect your dish-
washer to the WiFi network.
Set up WiFi?

Network/WiFi
No
Select if you do not want to integrate
No

the dishwasher into the WiFi network or
want to do it later.
If you select , the next steps will guide
Yes

you through the process to set this up.
Please refer to "Further settings, Network-
ing/WiFi".
50
čeština 

deutsch
Yes
Setting the temperature units

°C
Temp. unit
-
°C
Temperature display in Celsius.
-
°F
Temperature display in Fahrenheit.
Tap to select the option you want.

Setting the date

2022
Set date
Use the  and  arrow buttons to set the

year.


12
Set date

Use the  and  arrow buttons to set the

day and the month.
Press to save the setting.
OK

°F


OK

06

OK