Publicité
Les langues disponibles
Les langues disponibles
Audible Tones
Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER
▪
key four (4) times.
Use the UP and DOWN keys to select the audible tones.
▪
S0: sensor tone ON, alarm tone OFF
S1: sensor tone ON, alarm tone ON (default)
S2: sensor tone OFF, alarm tone OFF
S3: sensor tone OFF, alarm tone ON
Touch and hold the UP key for 5 seconds to confirm the selection.
▪
TEMPERAT URE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit remembers the previous
temperature settings. When the power is recovered, the cabinet temperature will go back the same
setting temperature as before the power interruption.
TEMPERATURE ALARM
An audible alarm will sound if the temperature in one of the zones rises or falls outside the temperature
range. The relevant temperature display will flash at the same time. The temperature the appliance is
set at determines the temperature the appliance recognizes as being too warm or too cool. The
audible alarm will sound and the temperature display will flash:
-
When you switch the appliance on, if the temperature inside the appliance is very different from
temperature set.
-
When there has been a lengthy interruption to the power supply.
-
When too many items have been put into the unit at one time. Or too much ambient air flowed
when rearranging and removing storage items.
-
When the door is not been closed tightly.
-
The appliance is faulty.
The audible alarm will be automatically silenced and the temperature display stops flashing when the
temperature is reached again. However, if the noise disturbs you, you can switch the audible alarm
off before this if you wish by pressing the POWER key once. The alarm will stop. The
relevanttemperature display continues to flash until the set temperature has been reached. The
display then lights up constantly, and the alarm system is fully active again.
DOOR ALARM
If the door has been left open for more than 60 seconds, the audible alarm will sound. Closing the door
or pressing the POWER key once can switch off the audible alarm.
INTERIOR LIGHT / TriColor
The interior light makes it easy to view your wine labels and enhances the display of your collection.
Touching and holding the LIGHT mark for 5 seconds toggles between 2 modes of operation for the
internal lights: functional (default) mode and showcase mode. If you are in functional (default) mode,
the lights will turn on only when the door is open. If you are in showcase mode, the lights will be on
whether or not the door is open. The unit is equipped with a LED light fitting system. To change the
LED light fitting pls contact the service department.
NOTE: Please use only the original LED light fittings provided by the manufacturer.
Select the color of the interior lighting orange, white and blue by touching the LIGHT key. Touch the LIGHT
key to switch between single color mode and dynamic color mode. In dynamic color mode, the interior
lighting will start to cycle through the 3 available colors. Touching the LIGHT key once when the desired
color is on, your interior light will be changed to that color. To return to dynamic color mode, touch the
LIGHT key again.
the
in
set
EN-78
Publicité
