Le Chai LBN590POV Manuel D'installation page 77

The temperature will increase 1ºC/1ºF if you touch the UP key once, or the temperature will decrease
•
1ºC/1ºF if you touch the DOWN key once. The display flashes while you make the setting.
The set temperature will temporarily flash in the display for 5 seconds after the temperature has been
•
set. Then the display shows the current inner temperature again.
To view the set temperature at any time, touch the Setting Selector
•
temporarily flash in the display for 5 seconds. Then the display shows the current inner temperature
again.
SETTINGS MODE
Certain settings on the wine cellar can only be selected in settings mode.
Touch and hold the UP key for 5 seconds to enter and leave Settings mode. The appliance will leave
Settings mode automatically after approximately one minute.
ºF/ºC Selection
Lightly touch and hold the UP key for 5 seconds to enter Settings mode.
▪
Use the UP and DOWN keys to select the temperature display setting in Fahrenheit or Celsius degree.
▪
Touch and hold the UP key for 5 seconds to confirm the selection.
▪
Display Brightness
▪ Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER
key once.
▪ Use the UP and DOWN keys to select the brightness of the display when the door is close. When the
door is open, the display brightness returns to its normal level.
d0: off
d1: dimmest setting (default)
d2: medium setting
d3: brightest setting
▪ Touch and hold the UP key for 5 seconds to confirm the selection.
Interior Lighting Brightness
▪ Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER
key twice.
▪ Use the UP and DOWN keys to select the brightness of the interior lighting when the door is close.
When the door is open, the interior lighting returns to its normal level.
L0: off when the door is close or open
L1: dimmest setting
L2: medium setting
L3: brightest setting (default)
▪ Touch and hold the UP key for 5 seconds to confirm the selection.
Fan Mode
Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the
▪
POWER key three (3) times.
Use the UP and DOWN keys to select the fan mode.
▪
F0: Silent mode - Energy saving mode (default)
F1: DynaClima mode - half time
F2: DynaClima mode - full time
Touch and hold the UP key for 5 seconds to confirm the selection.
▪
key, the set temperature will
EN-77