Tripp-Lite PDUMV30HV Manuel Du Propriétaire page 4

Installation
Note: Regardless of configuration, the user must determine the
fitness of hardware and procedures before mounting. The PDU and
included hardware are designed for common rack and rack enclosure
types and may not be appropriate for all applications.
1A
Zero U Rack Configuration (Mounting Brackets).
Prior to installation, determine the rack location in which
the PDU is to be installed. Attach the mounting brackets
to the back of the PDU as shown, using the included
screws. To assist with proper positioning, the brackets
have four screw holes each; make sure that the same
two holes are used to attach each bracket to the PDU.
After attaching the brackets, position the PDU in the
rack and mount it by installing four user-supplied
fasteners through the brackets into the rack.
1B
Zero U Rack Configuration (Mounting Buttons).
Attach the included mounting buttons to the PDU.
Position the PDU as desired in the rack enclosure, align
the buttons with the rack mounting slots, and slide the
PDU into position.
1C
Under-Counter Configuration. The PDU may be
installed under a counter using the included mounting
brackets. Attach the mounting brackets to the back of
the PDU as shown in STEP 1A. Secure the PDU to the
underside of the counter by installing two user-supplied
screws through each bracket into the counter.
Note: Your model may differ.
Features
2
1
1
NEMA 5-15/20R Outlet (PDUMV30, PDUMV30-ISO, PDUV30-36)
2
C13 Outlet (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6, PDUMV20HV-36,
PDUMV30HV, PDUV30HV)
3
C19 Outlet (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6, PDUMV20HV-36,
PDUMV30HV, PDUV30HV)
4
L5-30P, L6-20P or L6-30P Locking Plug
3 4
4
1A
1B
1C
6
5