Télécharger Imprimer la page

Bestron AHP1200 Mode D'emploi page 19

Masquer les pouces Voir aussi pour AHP1200:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
instruction manual
before firSt uSe - cleaning
1. Remove the appliance from the packaging, and remove all packaging materials.
2. Clean the appliance before using the appliance for the first time (see 'Cleaning and maintenance').
T he appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
K eep house birds away from the appliance when it is in use; fumes released from the non-stick
coating can cause stress to birds.
D o not touch the appliance if it falls into water. Remove the plug from the wall socket immediately.
Do not use the device again.
before firSt uSe - Assembling
Assemble the glass lid (3) and knob (4) as follows:
uSe - preheating
1. P ut the appliance on a level and heat-resistant
surface. Keep birds out of the area when using
the appliance.
2. I nsert the thermostat fully into the socket (see
Figure 4).
O nly the supplied cable with thermostat may be
used.
3. Put the plug in the wall socket.
4. A djust the thermostat dial to the required
temperature (position 1 through 5). The indicator
light on the thermostat will illuminate to show that
the heating element has been switched on.
Position Temperature (°C)
1 approx. 115°C
2 approx. 155°C
3 approx. 175°C
4 approx. 185°C
5 approx. 220°C
5. A fter waiting a few minutes check whether the indicator light is extinguished. Once the indicator light has
extinguished the appliance has reached the required temperature, and is ready for use.
D uring use the heating element will switch on and off to keep the temperature of the pan constant.
Consequently the indicator light will also occasionally be illuminated.
5
19

Publicité

loading