Domo DO1035A Mode D'emploi page 58

1. ON/OFF touch
To turn the unit off or on.
2. "+" and "-" touch
Use these touches to select the temperature. The temperature can be set between 17°C and
30°C. When pressing both buttons at the same time you can switch between "°C" or "°F".
3. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch
the function will change: COOL – DRY – FAN. The related indication light will turn on on the
control panel. If you choose the FAN setting, the ventilation blows on the automatic position.
You can only adapt the ventilation speed with the remote control.
4. LED display
Will show het temperature selections. When the "dry or "fan" mode is selected, the display
will show the room temperature.
REMOTE CONTROL
When using the remote control make sure that you always
aim it towards the apparatus. If you don't do this, you can
briefly aim the remote control towards the apparatus and
press the ON-OFF button.
When the apparatus receives a signal of the remote
control you hear a beep. The remote control must be used
within an eight-metre radius around the apparatus.
1. ON/OFF touch
To turn the unit off or on.
2. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch
the function will change: COOL – DRY – FAN. The related indication light will turn on on the
control panel.
3. FAN touch
With this touch you can select the fan speed: LOW
4. SLEEP touch
You can use this touch for activating the "sleep" mode.
58
DO1035A
Remote LED Screen Indicators
Remote LED Screen Indi
Transmission Indicator
Lights up when remote sends
signal to unit
MODE display
MODE display
Displays the current
Displays the current
mode, including:
mode, including:
AUTO
AUTO
COOL
COOL
DRY
HEAT DRY
FAN HEAT
FAN
1
2
3
4
FAN SPEED display
FAN SPEED display
Displays selected FAN SPEED:
Displays selected FAN SPEED:
HIGH,
or LOW
– HIGH
or
This display is blank when
This display is blank when
set to AUTO speed.
set to AUTO speed.
Transmission Indica
Lights up when remo
signal to unit
ON/OFF display
ON/OFF disp
Appears when the unit is t
Appears whe
and disappears when it is
and disappea
TIMER ON d
Displays whe
ON is set
5
MED,
HIGH, MED,
– AUTO.
LOW
6
7
8
9
SIL
Not a
Temperat
Displays t
when usin
Temper
Timer s
This displa