Domo DO1035A Mode D'emploi page 56

INSTALLATION
· Place the air conditioning on a solid and stable floor, this way
you will prevent excessive noise and vibrations. Make sure
that the floor is strong enough to support the weight of the
appliance.
· The appliance has small wheels for easy moving. Make sure only
to move the air conditioning over a flat and level surface. Be
careful when moving the air conditioning over carpet. Never roll
the unit over an object.
· The plug must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local standards
and requirements.
· Never place any object within 30 cm round the air conditioning.
· The air outlet hose must be used in the "cool" or "auto" mode. During the "fan" or "dry"
mode, you don't need to attach the air outlet hose.
· Make sure there is a free surrounding of at least 50 cm around the outlet.
· Make sure the air outlet hose isn't bend during use.
INSTALLATION OF THE WINDOW KIT
· Place the coupling of the air outlet hose on the end of the hose.
· Place the air outlet hose on the air outlet at the back of the appliance.
· Place the coupling of the window attachment on the other end of the air outlet hose.
· Place the window adaptor in your window. This is possible for horizontal and vertical sliding
windows. Block the window adapter at the desired length.
· Attach the hose with the coupling to the window adapter.
· Make use of the window seals to close off any possible openings in the window.
· Block the window adapter at the desired length using the supplied window adapter plug.
· If desired, you can fix the window with the L-iron and 2 screws.
56
DO1035A
max 120 cm
min 30 cm