Safety
2
Safety
2.1
Safety symbols
Danger to life!
Identifies imminent hazard. If you do not avoid the hazard, death or severe injury will result.
Hazardous situation!
Identifies a potentially hazardous situation. If you do not avoid the situation, injury or damage to
property can result.
Prohibition!
Identifies imminent a prohibition. If you do not avoid the prohibition, death and severe injury, or damage
to property will result.
Important information or useful hints for the usage.
2.2
Explanation of basic concepts
Gripping range:
Gripping good(s):
Opening width:
Immersion depth:
Device:
Product dimensions:
Dead weight:
Carrying
capacity/working load
limit (WLL*):
Area in proximity to the
ground:
2.3
Definition skilled worker / specialist
Only skilled workers or specialists are allowed to carry out the installation-, maintenance-, and repair work on this
device!
Skilled workers or specialists must have for the following points (if it applies for
this device), the necessary professional knowledge.
54500008
•
specify the minimum and maximum product measurements of the gripping good,
which can be gripped with this device.
•
is the product, which will be gripped or transported.
•
consists of the gripping range and the measure to drive over the gripping good.
gripping range + measure to drive over the gripping good = opening width
•
is the maximum gripping height of gripping goods, conditional of the height of the
gripping arms of the device.
•
is the description for the gripping device.
•
Are the dimensions of the gripping good (e.g. length, breadth, height
of the product).
•
is the own weight (without gripping good) of the device.
•
specify the maximum possible load of the device (for lifting of gripping goods).
*
= WLL → (english:) Working Load Limit
•
the gripping good must be lowered to just above the ground (approx. 0.5 m)
immediately after being picked up (e.g. from a pallet or from a truck). For transport, lift
the gripping good only as high as necessary (recommendation approx. 0.5 m above
the ground).
•
•
•
•
4 / 24
for mechanic
for hydraulics
for pneumatics
for electrics
GB