Publicité
Les langues disponibles
Les langues disponibles
COMPATIBILITY M6 SCREWS / TOP PLATE
ASSEMBLY / DISASSEMBLY OF THE FOIL
❶
Place your foil on a smooth surface. Install the two SCS inserts with the recommended screws.
❷
Insert the SCS inserts over the holes in the carbon plate.
EN
- 26
❸
Slide your foil to the desired setting. Tighten all screws. Your board is ready for use.
For disassembly, do the reverse.
INSTALLATION OF THE FIN
The HIPE 6'5 and 7'5 are equipped with a box at the front of the foil to keep your heading when you gain
speed on the water before flying with the foil.
❶
Slide the Nut inside the US Box towards the front of the Board.
❷
Place the Base of the Fin in the rail of the Box and
slide the Fin to the position of your choice.
GONG-GALAXY.COM
EN
❸
Move the Nut so that it is facing the hole in the
base of the Fin, insert the screw, and tighten.
- 27
Publicité
