Télécharger Imprimer la page

Gong HIPE Perf Guide De L'utilisateur page 13

Publicité

Les langues disponibles

Les langues disponibles

FOOTSTRAP INSTALLATION
The HIPE are equipped with footstrap inserts dedicated to the practice
of Wing foil and Kite foil. For use in SUP foil or Surf foil, we recommend
strapless practice. Your footstraps are delivered with screws adapted to the
depth of the footstrap inserts and serrated plates to block their rotation.
>⃝●
The screws M5x16
(FOOTSRAPS)
are delivered in the repair kit.
Lift the neoprene sleeve to access the holes in
the footstrap, which are designed to receive the
screws.
17 cm
17 cm
Adjust the width of your footstrap by selecting the row of holes that fits the size of your feet.
For a tighter fit, use the middle rows, to loosen the footstrap, use the outer rows of the strap.
CAUTION:
it is imperative to screw perfectly
vertically to the threads and above all not to
leave any sand in the threads before screwing.
You could cause non-repairable damage to the
threads.
EN
x 5
Position the serrated plate opposite the footstrap
insert. Use two screws for each end of the
footstrap and insert them into the external holes of
the serrated plate.
17 cm
17 cm
17 cm
17 cm
Repeat this procedure for the second strap.
- 24
x 10
SCREWS AND WASHERS SUPPLIED
In order to be perfectly compatible with our different foil top plate models,
delivered with 2 sets of
choose the appropriate screws.
EN
Make a test to make sure the strap is correctly
adjusted: the strap must be neither too loose nor too
tight: you must be able to slide your feet easily into the
straps and remove them easily too. But there should be
no gap between the top of your foot and the strap. They
must be in contact with each other. Note that the setting
must be changed if you practice with neoprene booties
or if you practice barefoot.
screws. You can identify below the model of your foil's top plate and
TOP PLATE FOIL V1 / V2
4 x Screws M6 x 20 mm Torx Round head & 4 washers
2 x SCS Inserts for US BOX double entry
CARBON MAST
4 x Screws M6 x 25 mm Torx Round head & 4 washers
2 x SCS Inserts for US BOX double entry
- 25
GONG-GALAXY.COM
your HIPE PERF is

Publicité

loading