Bosch MFW35 Serie Mode D'emploi page 19

Overview
X Fig. A
1 Base unit
a Drive for attachments
b Button I or k*
c Button O or rev*
d Operation indicator
e Release button
f Carrying handle
g Storage compartment with cover
h Mains cable
i Cable storage compartment
2 Base attachment
a Housing
b Feed chute
c Filling tray
d Pusher
e Worm gear with agitator paddle
f Threaded ring
3 Meat mincer insert
a Blade
b Perforated disc, fine*
c Perforated disc, medium
d Perforated disc, coarse
4 Sausage filler insert
a Bearing ring
b Sausage filler nozzle
5 Kebbe insert
a Conical ring
b Kebbe nozzle
X Fig. B
6 Shredding attachment*
a Housing
b Feed chute
c Cap
d Filling tray
e Pusher
f Slicing insert
g Shredding insert, coarse
h Shredding insert, fine
i Grating insert
7 Citrus press attachment*
a Collecting tray
b Filter insert
c Pressing cone
d Driving shaft with spring
* depending on the model
MFW3_EU_8001019358.indb 19
The operating instructions refer to different
models of the appliance. An overview is
provided on the pages that feature the
figures. X Fig. M
Spare parts and accessories are
available from Customer Service or at
www.bosch-home.com. X "Spare parts
and accessories" see page 26
Before using for the first
time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging.
■ Remove the packaging material that is
present.
■ Dismantle any assembled parts into
their individual parts. Do this in reverse
order, as described under „Preparation".
■ Check all parts for completeness.
X Fig. A / B
■ Inspect all parts for visible damage.
■ Thoroughly clean and dry all parts
before using for the first time.
X "Care and daily cleaning" see
page 23
Overview en
19
01.12.2015 12:05:48