KERN CDS Serie Notice D'utilisation page 91

Procedure:
3. Define limit values



TCDS-BA-def-2210

Make sure that the scale is in counting mode and that an
average piece weight has been defined (see chap. 9.2.1).
If necessary, switch over with the

Call up menu setting < ref >.

Use the navigation keys  to select the setting < check
 limits > and confirm with ➔ button.
< limupp > will appear.

Press ➔ button to confirm, the numeric input window for
entering the upper limit value will appear.
The active digit is flashing.

Enter upper limit value (numerical input see chap. 3.2.2)
and confirm the entry.
The balance returns to the < limupp > menu.

Use the navigation keys  to select setting < limlow >.

Press ➔ button to confirm, the numeric input window for
entering the lower limit value will appear. The active digit is
flashing.

Enter lower limit value (numerical input see chap. 3.2.2)
and confirm the entry.
The balance returns to the < limlow > menu.

Press repeatedly -button to exit menu. Finished the
setting works, the weighing balance will be ready for check
counting.
key.
35