Hendi 231852 Mode D'emploi page 7

4. DEVICE OPERATION
4.1. CONTROLS
The controls and pilot light are located on the top
of the device in the middle of the alumilium base.
1. Green (I) start push button
2. Red (O) stop push button
4.2. ASSEMBLING THE DISCS
Lift up the locking handle as shown in figure no. 1
And open the cover. Remove the ejector and place
appropriate disc. Close the cover. Push the start
Opening the cover (figure no. 1)
4.3. DISCS – STANDARD EQUIPMENT
Shredding discs
Slicing discs
button to automatically hook the discs in the cor-
rect position.
BE CAREFULL WITH THE DISC BLADES!
PICTURE
Disc position (figure no. 2)
PART NO.
280300
280416
280317
280102
280126
SIZE
3mm
5mm
7mm
2mm (3 blades)
4mm (2 blades)
7
EN