Kärcher Wndsor Versamatic Plus 14 Instructions D'utilisation page 13

Maintenance
Replacing The Printed Circuit Board
Remove Exhaust Filter Cover (6).
Remove the three screws on the vacuum tube cover
(42). Disconnect the wires and slide the circuit board
(43) out.
Install new board, attach wires and install cover.
42
43
Replacing Vacuum Motor
Remove the power head from the upper body.
Remove the dust bag housing bumper (44) and
remove the four screws on the motor cover (8).
8
Slide vacuum motor out and install new motor. Re-
assemble cover and bumper.
44
86404580 VERSAMATICPLUS 14 & 18 13