HIGHONE 981953 - DC 8 B FD W566C Consignes D'utilisation page 9

Les langues disponibles

Using the appliance

Drying program table

3. Except for the [Cotton iron], [], [Wool], [Hot air], [Cold air] and [Refresh] programs, all the other

programs can be used with the [Drying level] function.

• Instructions relating to the [Anti-crease] function

At the end of the drying cycle, the anti-crease process lasts 30 minutes (default) or 120 minutes

(if selected). The indicator of the [Anti-crease] function lights up when it is selected. This function

prevents the laundry from creasing. The laundry can be removed during the anti-crease phase.

Except for the [Cold air], [Refresh] and [Wool] programs, all the other programs can be used with

this function.

• Instructions relating to the [My cycle] function

This function is used to set and save your favourite program, which you use frequently.

1. Use the program selector button to select the required program and other drying functions.

2. Press and hold the [Drying level] or [Quick dry] button for 3 seconds until the beep sounds: the

required program has been saved.

3. Place the program selector in the [My cycle] position; your favourite program is then ready to

be launched. If you want to change the settings of [My Cycle], repeat steps (1) and (2).

• Instructions relating to the [Child lock] function

1. This machine has a special child lock function; this prevents children from pressing the buttons

or causing malfunctions.

2. When the dryer is running, outside of the standby mode, press the [Anti-crease] and [Signal]

buttons simultaneously for more than 3 seconds to activate the Child lock function. When the

Child lock function is activated, the screen displays the Child lock icon and none of the buttons can

be activated except the [On/Off] button. In Child lock mode, press the [Anti-crease] and [Signal]

buttons simultaneously for more than 3 seconds to deactivate the Child lock function.