Electrode assembly :
1.
Put off the cap of the electrode (Fill the cap with ¾ of water to store the electrode)
2.
Assembly the electrode respecting the order of the pieces shown in the central figure. Insert the electrode
into the electrode holder "j" pushing and rotating to the left and right. When all the pieces are in the
electrode holder screw the nut but not totally to push the electrode till the foot of the tube and to retire it for
2 cm so to adjust the electrode at the centre of the hose.
3. Now it is possible to screw totally the nut of the electrode holder "j".
12/05/2010
16