General Information - WIKA BCS10 Mode D'emploi

1. General information

1. General information
The calibration system described in the operating instructions has been designed
■
and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
EN
production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instru-
■
ment. Working safely requires that all safety instructions and work instructions are
observed.
Observe the relevant local accident prevention regulations and general safety regula-
■
tions for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
■
product contrary to its intended use, non-compliance with these operating instruc-
tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-
cations to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with
■
international standards.
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
www.wika.de / www.wika.com
SP 60.08
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
E-mail: sf6-sales@wika.de
WIKA operating instructions calibration system, model BCS10