WIKA BCS10 Mode D'emploi page 17

6. Commissioning, operation
WIKA operating instructions calibration system, model BCS10
Compare and record the displayed value of the
test item with the displayed value of the digital
pressure gauge.
To improve the readability of the display, the
backlighting can be activated by means of the
Scroll-Down button.
Open the pressure relief valve after calibration to
depressurise the system.
The test item can be separated from the
calibration system.
The calibration system can now be dismounted
in reverse order.
WARNING!
Only disconnect once the system
has been depressurised!
EN
17