D-Link DSL-3682 Guide D'installation page 5

SYSTEM REQUIREMENTS
• ADSL/VDSL Internet service
• Computer with:
• Microsoft Windows
• Internet Explorer 8, Edge 25, Firefox 20, Safari 4, or Chrome 17 or higher version with Java
installed and enabled
PRODUCT SETUP
HARDWARE SETUP
PC
DSL-3682 Phone
PC
DSL-3682 Phone
PC
Power DSL-3682
PC
PC
Power DSL-3682
DSL-3682
®
10/8/7/Vista/XP SP3 or Mac with OS X 10.7 or higher
Step 1
Position your DSL-3682 near your PC and a telephone wall jack
which provides DSL service. Keep the modem router in an open
area for better wireless coverage.
Step 2
Plug one end of the supplied DSL phone cable into the DSL port on
the back of the modem router, and the other end into the telephone
wall jack.
Step 3
Connect the supplied power adapter to the modem router and a
power outlet, and press the power button. The device LEDs will light
up. Wait approximately one minute before going on to step 4.
Step 4
Plug one end of the supplied Ethernet cable into the port labeled
1 on the back of the modem router, and the other end into the
Ethernet port on your computer.
If you are setting up the DSL-3682 using a laptop or mobile
device, connect it using the Wi-Fi network name and password
printed on the label attached to the back your router.
5