Publicité
Les langues disponibles
Les langues disponibles
Mode
12V
LITHIUM
Press & Hold
12V
AGM+
Press & Hold
13.6V
SUPPLY
Press & Hold
12V
REPAIR
Press & Hold
Using 12V Lithium. [Press & Hold]
12V Lithium charge mode is designed for 12-volt
lithium-ion batteries only, including lithium iron phosphate.
CAUTION. USE THIS MODE WITH CARE. THIS MODE
IS FOR 12-VOLT LITHIUM BATTERIES ONLY. LITHIUM-
ION BATTERIES ARE MADE AND CONSTRUCTED
IN DIFFERENT WAYS AND SOME MAY OR MAY NOT
CONTAIN A BATTERY MANAGEMENT SYSTEM (BMS).
CONSULT THE LITHIUM BATTERY MANUFACTURER
BEFORE CHARGING AND ASK FOR RECOMMENDED
CHARGING RATES AND VOLTAGES. SOME LITHIUM-ION
BATTERIES MAY BE UNSTABLE AND UNSUITABLE FOR
CHARGING.
For charging 12-volt lithium-ion batteries,
including lithium iron phosphate. When
selected, a blue LED will illuminate.
14.2V | 15A | Up To 400Ah Batteries
For charging 12-volt advanced AGM
batteries, which requires a higher than
normal charging voltage. When selected,
a blue LED will illuminate.
15.5V | 15A | Up To 400Ah Batteries
Converts to a DC power supply for
powering any 12VDC device, like a tire
inflator, oil changer, or as a memory
retainer when replacing a battery. When
selected, a red LED will illuminate.
13.6V | 5A | Max 6A
An advanced battery recovery mode
for repairing and storing, old, idle,
damaged, stratified or sulfated batteries.
When selected, a red LED will illuminate
and flash
16.5V | 1.5A | Any Capacity
Explanation
Publicité
