JVC KW-NT800HDT Manuel D'instructions page 77

Listening to the SiriusXM Radio
Before operating, connect the SiriusXM tuner (not supplied) to the expansion port on the rear of the unit.
(☞ Installation/Connection Manual)
Activating subscription
1
Select "SiriusXM" as the source.
SiriusXM Tuner starts updating all the SiriusXM channels.
2
Check your Radio ID.
Radio ID is labeled on the casing of the SiriusXM Tuner or the bottom of the SiriusXM Tuner unit.
• You can also display the Radio ID on the screen by tuning in to Channel 0.
– To hide the ID display, select any channel other than "0".
3
Contact SiriusXM on the internet at www.siriusxm.com/activatenow and enter the
required information, or call 1-866-635-2349.
Once activated, the unit can then be tuned to one of the available channels.
Signal Reception indicator
Channel name
[Band] Selects the band.
SXM1 SXM2
[4] [¢] Press: Selects a channel.
Hold: Changes the channel rapidly.
– While searching, invalid and
unsubscribed channels are
skipped.
Band
Preset number Channel number
[ ] [ ]
SXM3
[List]
[
[
[Mode]
77
Category name
The text information
currently received
Selects a preset channel.
Displays the Category/Channel List.
Selects a channel directly.
]
Switches between preset list screen
]
and tuner source screen.
Changes the settings of the reception
restrictions.