JVC KW-NT800HDT Manuel D'instructions page 65

iPod/iPhone operations
Playing back iPod/iPhone
1
Connect iPod/iPhone
For connections, refer also to the Installation/
Connection Manual.
• Use the following cables:
– To listen to the music: USB 2.0 cable
(accessory of the iPod/iPhone)
– To watch the video: USB Audio and Video
cable for iPod/iPhone—KS-U49 (not supplied)
USB 2.0 cable
(accessory of the iPod/iPhone)
or
2
Select "iPod" as the source.
• Up to 4 iPods/iPhones can be connected to the
USB cable of this unit via a USB hub.
• When multiple iPods/iPhones are connected, you
can select the iPod/iPhone to play by pressing
the [ ] on the iPod/iPhone playback
screen. (☞ page 67)
KS-U49 (not supplied)
KS-U49 (not supplied)
HUB
iPod
USB 2.0 cable
• You can control the following iPod/iPhone
models:
– iPod classic
– iPod nano (6th Generation)
– iPod nano (5th Generation)
– iPod nano (4th Generation)
– iPod nano (3rd Generation)
– iPod nano (2nd Generation)
– iPod nano (1st Generation)
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPod touch (1st Generation)
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
Caution:
• When you turn on this unit, the iPod/iPhone is
charged through the unit.
However, when connected via a USB hub, the
iPod/iPhone is not charged.
• Do not connect 2 or more USB hubs to the USB
cable of the unit.
• When connecting via a USB hub, connect the
USB hub to the USB cable first, then connect the
iPod/iPhone to the USB hub.
Do not connect the USB hub with iPod/iPhone
connected.
• You can connect USB devices and iPod/iPhone to
the same USB hub.
65
HUB
iPod
iPod
HUB