Pkm FS2-60BBGTY Mode D'emploi page 24

Carbon filter
Activated carbon filter can be used to trap odors. Normally the activated carbon
filter should be changed at three or six months according to your cooking habit.
Activated carbon filter cannot be washed or recycled. The installation procedure
of activated carbon filter is as below.
1. Slide the front part of the cooker hood.
2. In order to install the activated carbon filter, the Al anti-grease filter should be
detached first. Press the lock and pull it downward.
3. Put the activated carbon filter into the unit on the side of motor and turn it in
clockwise direction. Repeat the same on the other side. Put back to the grease
filter in position.
Note: When the activated carbon filter attached, the suction power will be
lowered.
3. Control panel
CAUTION! The lamp must not be covered by thermal insulation or other
materials. Do not touch the illuminant within 30 minutes after operation.
NOTICE! Only switch on the lights while the appliance is operating. Do not
switch on the lights to lighten the room.
Unplug the appliance before installing the
carbon filter.
For recirculating mode only.
24