Publicité
Les langues disponibles
Les langues disponibles
PREPARE THE HOOD (CONT'D)
(NON-DUCTED HOODS ONLY)
8. Carefully slide the upper decorative flue down
inside the lower flue.
9. Carefully place the decorative flues into the
recessed area of the range hood top.
Note: Air vents must be up.
ROOMS WITH 10-FOOT CEILINGS
Rooms with 10-Foot ceilings require flue
extension model RFXN5304,
available from your local dealer.
10. Discard upper flue supplied with
product. Replace with flue
extension RFXN5304.
11. Secure the recirculation plenum
to the upper flue with (4) flat head
screws.
INSTALL THE HOOD
Note: At least two people will be
required to mount the hood.
1. Align the rectangular opening on the back of
the hood with the wall-mounting bracket.
Gently lower the hood until it securely
engages the bracket.
2. Level the hood and secure with (2) mounting
screws under the hood. Use drywall anchors
provided if wall studs or framing are not
available.
3. Raise the upper flue until its holes align with
holes in the flue mounting bracket (located
on ceiling).
4. Secure the flue with (2) mounting screws.
All manuals and user guides at all-guides.com
WALL FRAMING
MOUNTING
SCREWS
(4.8 x 38mm)
- 12 -
P L E N U M
4 FLAT HEAD
SCREWS
UPPER FLUE
MOUNTING
BRACKET
RECTANGULAR
CUTOUT
3.9 x 9.5mm
MOUNTING SCREWS
Publicité
