Oase FiltoClear 3000 Notice D'emploi page 9

- English -
Closing the container
A. Clean the channel (37) around the
container rim.
• Grease the lid sealing ring (34) and
place flush around the container (38)
top edge.
B. Press the filter lid (8) including the
stack of foam filters on the container, if
necessary, assist with your own body
weight.
• Place the clamping ring (10) around
the container top edge (do not pinch
the power cable) and assemble.
• Engage the closing hook (35).
• Push in the safety latch (36).
Cleaning the foam filters
The Easy-Clean function (actuate the
cleaning handle and flush with water) allows
easy cleaning of foam filters, UVC unit and
UVC water housing.
A. Remove the closing cap from the drain
hose or the dirty water drain socket (7).
Attention: Do not lose the sealing ring in
the cap!
• Turn the function switch (5) counter-
clockwise to "Cleaning foam filters"
(41).
• Vigurously pull up the cleaning
handle (3) several times, then push
the handle down against the stop
("pumping" action).
• The foam filters will be rinsed by this
action.
B. As soon as only clean water appears in
the transparent hose connector (20), turn
the function switch (5) counter-clockwise
to "Cleaning UVC" (42).
• The UVC unit and the UVC water
housing are flushed.
C. As soon as only clean water appears in
the transparent hose connector (20), turn
the function switch (5) counter-clockwise
to "Filter water" (40).
• The unit filters the pond water.
• Close the drain hose or the soiled
water drain socket (7) using the
closing cap (insert sealing ring!) (See
Installation).
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
A
A
C
B
B
7