Télécharger Imprimer la page

FUXTEC FX-E2KS Manuel D'utilisation page 39

Publicité

Les langues disponibles
  • FR

Les langues disponibles

- Clean the hedge trimmer after each use with a dry cloth or, in the case of heavy
Soiling with a brush.
- Never spray the device with water.
- Keep the contacts of the battery and the device clean and dust-free.
- Remove the chain cover and then use a soft brush to remove debris from the guide bar, saw chain,
sprocket and chain cover.
- The saw-chain must not sag, but it should be possible to pull 2-3 millimetres off the saw-bar in the
middle of the saw-bar.
Disposal
WARNING!
Make used power tools unusable before disposal:
- mains-operated power tools by removing the connecting plug,
- battery operated power tools by removing the battery.
For EU countries only
Do not throw power tools into the household waste! According to the European Directive
2012/19/EC on waste electrical and electronic device and its implementation in national law, used
electrical device must be collected separately and recycled in an environmentally friendly manner.
Raw material recovery instead of waste disposal. Device, accessories and packaging should be
recycled in an environmentally friendly manner. Plastic parts are marked for recycling
according to type.
WARNING!
Do not throw batteries into household waste, fire or water. Do not open spent batteries. Batteries
should be collected, recycled or disposed of in an environmentally friendly manner.
For EU countries only: According to Directive 2006/66/EC, defective or used batteries must be
recycled.
NOTE
Please contact your local authority/city for information on disposal options,
Recycling raw materials instead of waste disposal.
Original manual FUXTEC FX-E2KS rev01
39

Publicité

loading