Franke AQFU0006 Notice De Montage Et De Mise En Service page 9

17. Replace the control unit
17.1 Remove the housing (see
17.2 Lever the battery compartment (a) out of the holder.
17.3 Loosen the nut (b), using an open-ended wrench.
17.4 Remove the control unit (c) by pulling it downwards.
☞
Important!
The solenoid valve must be connected before the power supply is connected.
17.5 Reassemble in reverse order.
18. Spare parts
Description
1 Solenoid valve cartridge . . . . . . . . 2030003033
2 Control unit . . . . . . . . . . . . . . . . . . 2030004490
3 Spare parts kit consisting of:
Non-return valve
Seals . . . . . . . . . . . . . . . . . . . . 2030004491
4 Lithium battery 6 V,
Type CRP2. . . . . . . . . . . . . . . . 2000104846
chapter 13.).
Order No.
5 Special wrench . . . . . . . . . . . . . . . 2000105636
6 Remote control . . . . . . . . . . . . . . . 2000101087
Accessories
Stainless steel care product
CHROMOL 0.5 l . . . . . . . . . . . 2000105091
Stainless steel care set, complete
CHROMOL 0.5 l
Sanding sponge, coarse
Sanding sponge, fine . . . . . . . 2000109019
Order No.
9